Name: GSM Auto Dialer
GSM Auto Dialer For Existing Alarm Systems
GSM Auto Dialer Introduction:
This GSM Auto Dialer is a device which built-in with GSM Module can enable your existing hardwired alarm system using GSM cellular network, rather than telephone line network for alarm transmission. It doesn't have any inputs or outputs, and can not pre-set phone numbers for auto-dialing, also it is without SMS alert function.
If you are looking for GSM auto dialer with inputs and programmable phone number for connecting your existing alarm systems, check this GSM cellular communicator. It's compatible with ADEMCO Contact ID for working as primary or backup communicator.
1. Unique,Elegant design with Microcomputer control.
2. With LCD screen to display the time, date, calender.
3. Built-in Control Keypad, easy operation.
4. Built-in Microphone, Can remotely monitoring the house.
5. Support two way communication function
6. With Emergency help function, press emergency button, the alarm will be triggered immediately
7. With backup rechargeable battery, work for 24 hours.
8. GSM Signal checking & weak signal warning.
9. Suitable to use at homes,villas, stores, museums or Warehouses etc.
10. Able to work with any wired alarm systems with telephone function to be a wireless GSM alarm system
Phone port: RJ11
GSM Frequency: 850/900/1800/1900/MHz
Suitable network: GSM
Temperature Range: –25°C--70°C
GSM LCD Alarm Panel (main unit) 1 pc
External Long Antenna 1 pc
Telephoneline 1 pc
AC/DC Adapter 1 pc
GSM Auto Dialer Installations:
1. Open the fixed cover of SIM card on the back of GSM dialer
2. Insert a SIM card Correctly, then replace the cover
3. Switch GSM’s antenna to a suitable direction
4. Connect the power supply, then power on.
5. Check the GSM Signal shown on the screen if it is ok
6. If desire to work with the alarm system, please connect the “TEL IN”of alarm host to any tel port(two ports) of this dialer.
7. If the GSM SIGNAL indicator is Solid light, which means the GSM Dialer does not detecting the wireless network or the SIM card is not inserted well.
8. If the GSM SIGNAL indicator is flashing, which means the signal is ok, the Dialer is already in standby mode.
1. Before you insert the SIM Card into the Dialer, please make sure turn off the power.
2. This SIM Card is working in your mobile phone.
3. It does not have PIN Code, otherwise will cause the SIM Card not working normally.
4. This card is with enough charges.
5. Please change the power supply if the Voltage is beyond the working range or the power rate is not enough.
6. Please don’t install this system in the places which without(or with weak) GSM signal.
7. You must not connect power before well-connected the wires & well-inserted the SIM card.
8. You must not take out or insert the SIM Card When the system is being powered.
Albanian-Dialer auto alarmi;Arabic-التنبيه طالب السيارات;Bulgarian-наречие алармата автоматично;Finnish-GSM hälytyksen auto kellotaulu;French-alarme composeur automatique;Greek-Συναγερμός dialer auto;Italian-allarme dialer auto;Portuguese-alarme discador automático;Russian-GSM alarmă;Thai-การโทรออกอัตโนมัติปลุก;Spanish-alarma marcador automático;Swedish-trådlös auto dialer för larmsystem;Danish-trådløs dialer for alarmsystem;Czech-bezdrátové pro poplašný systém;Dutch-draadloos auto-dialer voor alarmsysteem 900/1800MHz
Subscribe to our email newsletter: