Quad Beam Wired Wireless Perimeter Alarm System
Name: GSM Perimeter Alarm System
Powerful Perimeter Security System
G70WVSH Quad Beam Perimeter Security alarm system come with a pair of Quadruple Synchronized Beams sensor (four beams),the Four Beam
ensures minimum false alarm possibility against falling leaves, birds, small
animals etc. This beam sensor comes with laser beam alignment function which reduces the installation time and along with that increases the workability of the device. The Beam sensor comes with built-in Optical Viewfinder for easy and quick alignment. The Beam detector connects alarm panel via Wireless Frequency (433MHz) or cables (wired), The alarm panel is new design touchpad LCD burglar alarm system support landline and GSM Module (SIM Card).
When the beams are activated they will send signal to alarm panel, the alarm panel will make a phone call via landline, or use GSM module for auto dialing and sending text message.
Due to alarm panel integrated with GSM module, this system is also suitable for remote area where without landline equiped.
Main Features For Perimeter Alarm System:
0. Slim elegant design Alarm Panel with smart intelligent Touchpad, support PSTN (Lanline) and GSM (Cellular Technology).
1. Powerful Alarm System include interior Wireless PIR Motion Detector, Wireless Door/Window Magnetic Contact, exterior Wireless/Wired Active Infrared Beam Detector for protecting your inside and outside area.
2. 29 wireless zones (Each zone supports up to 4 sensors) and 2 dedicated zones for remotes (Supports up to 4 remotes or wireless keypads per zone)
3. 8 more wired zones (Each zone supports 1 wired sensor)
4. Can dial up to 5 phone numbers in sequence, 5 SMS mobilephone numbers.
5. Call and SMS both are compatiable with ADEMCO Contact ID.
6. Arm\ Disarm the system by: Main Host(Keypad), Wireless Keypad, Keychain Remotes, or even remotely by phones.
7. Check door\window status automatically (This is when the system is disarmed only, if a door is opened, it will sound fast "bi bi bi")
8. Support wireless "ding-dong" doorbell function (need to buy extra doorbell from us)
9. Non-volatile chip, information stored automatically when off power
10. Record up to a 10 second voice message, When alarm is triggered, it will automatically auto play the voice message over the phone.
11. Alarm Sounds if Phone Line is Cut
12. Remembers programming settings when power is disconnected
13. Available in both AC\DC with Low-voltage Indicators.
14. Learn sensors to alarm host panel, very easy operation.
15. Supports Door. Window. Motion. Smoke. Heat. Glass Break. Gas Leak. Carbon Monoxide Detector. etc.
16. Support ADEMCO Contact ID, can connect to CMS (Central Monitoring Station).
Perimeter Alarm System Technical Information:
- Working voltage?100~240VAC
- Operating power: 9-15VDC
- GSM Frequency?850/900/1800/1900MHZ
- Wireless Frequency?433MHZ / 868MHZ
- Static current: ? 80mA
- Alarm current: ? 500mA
- GSM Cellular Transmission Power: 2W
- Operating environment: Temperature: -10?-50?; Humidity:?90%
- Maximum available quantity of keychain (remote controllers) : 4 PCS
- Maximum available quantity of wireless sensors: 116 PCS
Infrared Beam Specification:
|Detection Method||4beams interrupted at the same time|
|Light Source||Digital Filter Type|
|Sensor Speed||35?700msec Adjustable|
|Warning Output||Relay OutputContact Rating: ACDC30V 0.5Amax|
|Dismantle Prevention Output||Relay OutputContact Rating: ACDC30V 0.5Amax|
|Adjusting Angle of Optical Axis (Horizontal)||180°?±90°?|
|Adjusting Angle of Optical Axis (Vertical)||24°?±10° ?|
|Hairline Pointer||Window type|
|Connection||M3Connection Assistance, Spiral Terminal|
|Dedew and Defrost Method||Heating type cover (made to order)|
|Other Function||Induction Testing Output Terminal|
|Weight||970g(Light Acceptor +Light Projector)|